日本軽トラ ハイゼットパネルバンの車中泊仕様をご紹介します　自作軽トラキャンピングカー　DIY VAN TOUR

日本軽トラ ハイゼットパネルバンの車中泊仕様をご紹介します　自作軽トラキャンピングカー　DIY VAN TOUR

Hello everyone. Today I will be introducing the Hijet Panel Van Model: S510P Mission 5MT, Drive system 4WD Displacement: 660CC The exterior was originally white, but I painted it all in 4 coats with Takara paints. The front bumper and ceiling are finished with rubber chipping.The wheels are genuine wheels.The

Color of the wheels is originally silver.I painted them with a special spray for wheels.Since winter is coming, I plan to change to studless tires this month. You can attach a tool box here. If I have time, I’d like to attach a tool box. It’s convenient because I can store the car’s tools.

Next is the driver’s seat. I would like to change the lining and ceiling. ..If I renovate it, I don’t think it will pass the vehicle inspection, so basically nothing has been renovated on the driver’s seat.This car was equipped with a car navigation system, ETC and a back camera.The 4WD button.The

Drive recorder is my own. I installed it.Next , I will introduce the window.It was originally an iron plate, but I cut the iron plate using a disc grinder and installed the window.The window also has a screen.You can block the sunlight by pulling it

Up.Bottom If you pull it down, it becomes a net and allows for ventilation.The price is not too expensive.It is originally a window used in campers with insulation, so it is thick, so I put sleepers in between to adjust the thickness.The window frame is coated with silicone.

I would like to add a window on the other side as well, but it has been postponed due to budget reasons.Next, I will introduce the renovation of the loading platform.I used cafe board for the front glass to serve as a frame. I made a shelf where I

Put my sleeping bags and thin futons.The one I’m currently using is a thin sleeping bag, so I’ll change it to a thick sleeping bag for winter.The wall in front of the loading platform was made of old wood.Next time I’ll renovate it. I would like to replace this old wood with a different material.The

Bottom of the frame/shelf is fixed with L-shaped metal fittings.This makes it easier to remove the cafe board when accessing the engine room.There is also insulation inside. I attached this so that I could access the engine as soon as I removed the cafe board here.The board on the side wall was painted with wax.The

Storage shelf here is for storage of pots, hot sandwich makers and cooking utensils.I attached a rubber band. I made sure that things wouldn’t fly out. I installed an electrical outlet here. The light wire was short, so I added an electrical outlet. Power for the electrical outlet is supplied from a portable power source.

Two types of insulation were used for the ceiling. A clear The mat and sound insulation sheet.The ceiling board was also painted with wax.Next, I will introduce the storage shelf on the other side.The top storage shelf is fixed with a fence to prevent things from going outside . I keep my tableware.

The bottom storage shelf is where I keep my coffee beans and seasonings. The bottom shelf is where Iwatani’s stove is stored. This is where I store my coffee grinder and filters. Here’s another one. I want to make a storage shelf.If I have time, I would like to make a storage shelf quickly.I

Attached Velcro to the back of the fence and fixed it.The next thing I’d like to introduce is a futon for sleeping in cars.It’s thick, so when you sleep on it, it’s on your back. It doesn’t hurt. I’m glad I bought it. It’s 180 cm long. It fits perfectly in my car.

It’s easy to clean up. The next thing I’d like to introduce to you is my new companion. The wood stove I used before had only one side of glass and wasn’t tall enough. I replaced it with Mt.SUMI AURA ver.2.

With the 3-sided glass, I can now clearly see the firewood burning from any angle. From now on, I want to enjoy sleeping in my car during the winter with this new companion. I think you can also attach grids to both sides.You can keep hot food and drinks there.I

Bought an extension to raise the height, but I haven’t used it yet… Introducing my homemade light truck camper this time . That’s all. Thank you for your high ratings and channel registration. Next time, let’s meet in the car.

日本自作軽トラ車中泊仕様のハイゼットパネルバンのご紹をします
VAN TOUR

一般的に販売されている軽トラキャンピングカーとは比べ物になりませんが、それでも自分でコツコツ改装した自作軽トラキャンピングカーです。

それではご覧ください。

★外国の方はCC字幕ボタンを押してみてください。
英語　中国語　日本語
★ If you want to see the subtitles, please press the CC subtitle button.

———————————————————————————————————————–

私のビデオが気に入った場合、私のチャンネルも登録お願いします　あなたのサポートは私たちがビデオを撮影する最大の動機です、どうもありがとうございます(╹◡╹)
————————————————– ————————————————– —————————

映画のBGMはすべて著作権を支払った本物の音楽であり、音楽の著作権使用の違反はありません

フェイスブックのファンページ
✅➡️ https://www.facebook.com/takki1106

インスタグラム
✅➡️https://www.instagram.com/dream_van_life1230/

協力メールボックス:
✅➡️ kegio9527@gmail.com

#車中泊
#keitruck
#carcamping
#軽トラキャンピングカー